Transferring Designs to Machine Using Embird

If your Brother or Babylock machine is connected to your computer via a USB cable, you can send your designs directly to your machine using Embird, just the same way as you would if you were writing designs to a USB stick.
First make sure your machine is on, then with the design selected, right mouse click and choose Input/output operations/USB stick. Embird “sees” the machine as another drive so that’s why you use the same command. Then just write the files to that drive. It’s that easy… :)
 
Carolyn Keber
Author of Embird and PE Design Tutorials
 

3 Responses

  1. Tahlia
    Tahlia December 17, 2013 at 8:10 pm |

    Hmm is anyone else experiencing problems with the pictures on this blog loading?

    I’m trying to find out if its a problem on my end or if it’s the blog.
    Any feedback would be greatly appreciated.

  2. Lorraine Clark
    Lorraine Clark February 26, 2017 at 1:53 pm |

    I have a Janome 11000 I don’t see any way in Embird to transfer my designs directly from my PC to Janome 11000.

    Is this possible with Janome?

Leave a Reply