Register Embird & Plugins

You will need to do the following before you can register Embird:

  • Download and Install Embird on your computer.
  • Purchase Embird Registration and wait for the password email to be sent from the Embird company (sent within one business day).

If you don’t receive your password or have other queries check the Embird FAQ¬† for further help.

When you place an order for registration, the Embird Company sends you two emails with the password in two different formats:

1. PASSWORD.KLC (password file sent in email attatchment).

You can enter your password using either the .KLC file, or the text version. Just choose the one you find easiest.

To use the .KLC file, the attachment needs to be saved to your Embird folder. We have a free video lesson that shows you how to do this here.

2. Text Form of the Password (sent within the content of the email).

Please note: Although the screen shots use an older version of Embird, the process is the same for all versions.

1 – Run your e-mail program and open the email you received from the Embird company that has your registration password within the content of the email.

2 – Copy the password as follows: Put the mouse at the beginning of password and click the left mouse button, holding it down while you drag over the password. At the end of password, let go of the mouse button. The password should be highlighted. While it is highlighted, hold down the Ctrl key on your keyboard and hit the letter “C” (or right click and select Copy from the menu options). This copies the password to an invisible clipboard on your computer.

3 – Open Embird and go to Help > Registration.

4 – A dialog box will appear on the screen. Move your mouse pointer to the password box and left click.

5 – Hold down the Ctrl key on your keyboard and and hit the letter ‘V’ to paste the password into this box (or right click and select Paste from the menu options). Then click the Register button.

6 – Embird will check the password. Wait several seconds until the password validation process is finished.

You can use the same “copy/paste” method described above to register your installed plug-ins.

1 – Open Embird and go to Help > Installed Plug-ins.
2 – A dialog box containing the list of installed plug-ins will appear on the screen.
3 – Copy and paste the plug-in password number to its corresponding cell.
4 – Click on the Insert Plug-in Registration Number button then the OK button to close this dialog box.

1 – Run Embird, it will start in “Manager” mode.
2 – Check the blue bar at the top of Embird Manager window – your name should be displayed there.
3 – Check whether plug-ins are installed and registered by going to Help > Installed Plug-ins.