View All Designs in Embird
At one time on Manager you could view all designs and at the bottom of designs was a place that you could tick that told you how many pages there were of designs and you could print them. You had the option of printing either odd pages or even so that you could print both sides of a page. You also had the option of going to any page. Now I can’t find it.
I think that you may have your Process Panel command in Manager turned off.
In Embird Manager go to Options on the Menu Bar and move down to Show Process Panel and left mouse click on it. The Process Panel will then appear and you’ll have the option to Print and you’ll also be able to see how many pages of designs are open etc.
I hope that helps. Best of luck.
Carolyn Keber
Step by Step Tutorials for all Embird programs and for PE Design
5 Comments »
Comment by Heila van der Merwe
August 2, 2012 @ 3:09 am #
After Fixing my computer, my Embird program doesn’t work propperly. I can open it but I struggle with the opening of the designs. Even my Iconizer doesn’t work. it doesn’t open any design at all.
Can you help me Please?
Another thing I want to know is, will there be an update on the Embird program as it is? If, Yes. When.
Thank you
Heila
Comment by Secrets Customer Support
August 26, 2012 @ 3:35 am #
Hi Heila,
I see you have recently upgraded to Embird 2012. There is now a new 2012 update, so I would suggest you reinstall your Embird. First back-up your passwords to your C drive, then uninstall Embird using Start/Programs/Embird/Uninstall.
To back-up or recover your passwords, go to Help/Passwords.
Download and install Embird 2012 again from here, then recover your password. Make sure to download either the 32-bit or 64-bit version as applicable for your operating system.
Once you have Embird installed and registered, you will also need to download Embird Studio for your Digitizing Tools and Sfumato plug-ins.
This is a bit inconvenient, but should do the trick.
If you have any more trouble, do let us know.
Kind regards,
Margaret Hardwick-Smith
Customer Support
at Secrets of Embroidery
Comment by Elvira Delfín
September 7, 2012 @ 6:36 am #
I have recently purchased Embird 12, I can open it, but the operations with designs are extremely slow . Another problem is when I want to see the designs in mini icons, the process is impossible, it takes too time. However, with a particular file .ART this process is fast, but when I want to edit a design it`s maintained in miniature and it can be scaled or work with it.
Comment by lorna abraham
October 4, 2012 @ 5:11 pm #
Just loaded new 2012 Embird and registered same, all Husqvarna designs previously loaded onto C drive now come up onlyin Quick view and won’t convert to Embird and are coming up in Notepad in technical format which is unreadable.
Help
Comment by admin1
October 28, 2012 @ 5:31 pm #
Hi Lorna,
It sounds like you need to adjust your Iconizer settings. Open Embird and go to Options/Iconizer Settings. Click on each of the Select All buttons, then click on Remove Image Type Files and Remove Quilting Type Files. Also, un-tick the box “Enable Viewer for Total Commander”. Click OK to confirm the settings.
There is more information on Emibrd Quick Viewer here.
Kind regards,
Margaret Hardwick-Smith
Customer Support
at Secrets of Embroidery
RSS feed for comments on this post. TrackBack URI
Leave a comment