THE PURPLE HAT - Free Glassware Slip-on Coasters 4x4

To view our collections and for ordering information,
please visit our web site: http://www.purplehat.co.za

Join our mailing list and receive updates when new collections
and free designs are added.

Happy holiday stitching
Anne Jennens
The Purple Hat
Email: annej@worldonline.co.za

-------------------------------------------------------------------------

These coasters are really easy to make. They are so useful for parties, make
popular craft fair items and are great hostess gifts.

Use different fabrics or add a small design, message or monogram for a very
special personalised set.

The coasters will provide a snug fit on most standard sized wine glass bases, 
no bigger than 3 inches in diameter. 

The SEW format designs have been reduced in size by 10% in order to fit SEW 
hoop parameters.

Thank you for your ongoing support and interest in our designs.

We hope you enjoy these two free designs and have a wonderful festive season.

CHEERS from all at The Purple Hat!

PLEASE NOTE:

- The colours indicated below are recommendations only.
- For neat results, please trim the jump stitches before each colour change.
- Stabilise and secure the fabric in the hoop as tightly as possible.
- All designs are originally designed with Husqvarna software and tested on a
  Husqvarna machine.
- These designs are copyrighted and are licensed for your own personal use.
- Resizing is not recommended

-------------------------------------------------------------------------
Design: Sliponblank
Size: 3.74 x 3.74 inches 1412 stitches
Instructions and Colour changes:

1. Hoop you fabric and stabiliser
2. Color 1 embroiders the satin stitch buttonhole opening
3. Place a piece of fabric approx. 4x4 inch on top of your design
4. Embroider Color 2 to attach the fabric.

Remove the design from your hoop.
Trim around the edges.
Using a seam ripper, carefully rip through the buttonhole opening
Turn right sides out and press.

-------------------------------------------------------------------------
Design: Sliponscroll
Size: 3.74 x 3.74 inches 3488 stitches
Instructions and Colour changes:

1. Hoop you fabric and stabiliser
2. Color 1 embroiders the fancy scroll on either side
3. Color 2 embroiders the satin stitch buttonhole opening
3. Place a piece of fabric approx. 4x4 inch on top of your design
4. Embroider Color 3 to attach the fabric.

Remove the design from your hoop.
Trim around the edges.
Using a seam ripper, carefully rip through the buttonhole opening
Turn right sides out and press.

-------------------------------------------------------------------------

