Christmas Bells Embroidery Project
embroidery designs
Search: 
 
 
 
 

Browse this Store

Christmas Projects


Home
Slippers
In the Hoop Bag
In the Hoop Doily
Gingerbread House
Faux Felt Bag
Xmas Stocking
Flower Brooches
Lace Bookmark
Napkin Card
Gift Bags
Hand Towel
Bottle Toppers
Velvet Stocking
Christmas Mitten
Christmas Cards
Hot Plate Holders
Xmas Appliscape
Frame Ornaments
Christmas Bells
Christmas Towel Toppers
Christmas Coasters
Tablecloth Holders
Teddy Bear Family
Festive Guest Towels
Table Runner
Christmas Cards 2006




 

 

Christmas Bells

Christmas bells

Lace Christmas Bells by Just 4 Lace

 

Create delightful little bells for your Christmas tree this year.

 

 

Materials You Need:

*Water soluble Vilene non woven (hoop 2 layers at a time)

*Marathon 40wt thread (Rayon or Polyester)

*Christmas Bell Embroidery Designs from Just 4 Lace

 

 

 

 

 

Freestanding Lace Christmas Bells Directions

 

These directions have been made for the Freestanding Lace Christmas Bell designs. 

The same method applies for any of the 3D Freestanding Lace designs from Just 4 Lace,

so you can see from this tutorial how easy the Freestanding Lace designs are to make.

 

1.     Water-soluble Vilene looks similar to normal Vilene, except it dissolves in water.  It dissolves quickly in cold or hot water and it is not sticky like the plastic version and does not stretch as much.

2.    Hoop two layers of this water soluble Vilene and start stitching out the design as you normally would on a piece of fabric.  Use any thread colors of your choice.

3.    Cut away most of the soluble.  It makes the stitching together easier when you can see the satin edges next to each other – Careful not to cut the satin stitches.

4.    Using the same color thread as the satin edge or invisible thread, start stitching the side panels together

 

5.    If you want your wrong side to look as neat as your right side, use the same color thread in the bobbin area

6.    Use a zig zag stitch wide enough to cover both sides of the satin edges

7.    When you get to the bottom edge pull the ends open so that the two satin edges lies next to each other while stitching.

8.    Do the same with all the other sides

9.    To close the last two sides, push the bell down at the back so that it does not get caught in the motion of the foot.  Gently pull the sides together as you sew.

10.                       Your bell should look like this now.  Note that the Vilene is still in place

11. DO NOT RINSE BEFORE ASSEMBLY as the Vilene hardens when dried and makes the stitching together almost impossible with a sewing machine when dry.

12.                       Hold upside down under a luke warm running tub, it should be warm enough so that you don’t burn, not hot as this tends to stretch the thread.

13.                       Place on top of a bottle or as you can see to your right, I dry mine on top of a cone of cotton, just make sure your bell is not dripping when drying on top of a cone.

14.                       To help keep the shape while its drying I use a large chicken egg for a mold ;0)  I found however that this is not always necessary as the bells holds its shape beautifully without molding it around a egg.

15.                       Add a cord or ribbon to the top and its ready to be hung.

 

I am sure you will enjoy creating bells as much as I did

 

Warm Hugs

Daleen

 

 

 

These directions may not be reproduced, copied or distributed without prior permission from Daleen at Just 4 Lace.  Thank you.

 

 

 

 

For a printable version of these instructions please click here.

Recommendations Tell a friend about this page Customer Comments Keep Me Updated Search Find What You're Looking For

Google
 
Web www.secretsof.com

Homepage |  Embroidery Designs |  Embroidery Tutorials |  Embroidery Projects |  Embird |  Terms & Conditions |  Sitemap |  Contact Us

© 2006 Copyright secretsof.com Embroidery Designs